How to Boost In-Building Cell Phone Signal Reception Using an 850 MHz Band, CDMA, EDGE, GSM, LTE Cellular Repeater.

FOR IN-BUILDING OR OUTDOOR USE

The RPT 900 850MHz cell phone signal booster is our flagship product. It has been in service since 2002 and is deployed in hundreds of locations in various parts of the world.

Working as part of a Distributed Antenna System (DAS) the range, power and performance of the Telcosat RPT-900 800MHz Band Cell Phone Signal Repeater is truly second to none when comparing the technical specifications and prices against the competitors products.

Many products, that claim to be in a similar class, are left well behind when it comes to comparing like-for-like technical specifications. The majority of companies will tell you that their booster has, for example, 85db of gain. What they are not telling you is that this also includes all other products in the line, such as antennas and in line amplifiers. A Telcosat RPT-900 has 95db of gain at the power out port. This is already 10 db, more than three times, above a competitor, AND it does not include any antenna gain or in line amplifiers.  

Technical support, warranty and all repairs are available in Calgary, Alberta, Canada.

Our design team configured the Telcosat repeaters using a modular concept. This means the major components such as the power amplifiers and the uplink / downlink up-converter boards are individual components. Each separate PCB board is gold flashed and housed in an rugged case that is machined from a solid block of aluminum. 

Like all Telcosat products, the RPT-900 is designed and manufactured in Canada. Like all Telcosat products, we do not use offshore manufacturing. 

If you have any questions regarding cellular repeater applications indoors or outdoors, please contact us today and a member of our design team would be pleased to assist you.

RPT-900 Technical Specifications
A Technical Ability In A Class Of Its Own

Frequency Range: 824 - 849 MHz (Uplink), 869 - 894 MHz (Downlink)
Passband Gain: 95 dB
Pass Band Ripple: ± 2.5 dB
Channel Ripple: 0.5 dB
Max Absolute Delay: less than 2µs Rx
Noise Figure @ Max Gain: 3.7 dB Typical
IMD 2 Tone: 43 dBc Typical @ Max Power
Max Power Output: 30 dBm RMS
EVM: less than 3%
Max SWR (In / Out): 1.5 : 1
Manual Gain Control: 50 dB in 2dB Steps
Spurious Outputs: 55 dBc
Max Power Supply: 28 VDC @ 55 W, 90 - 260 VAC
Operating Temperature: -30ºC to +60ºC
RF Connectors: 50 Ohm N Type, Female
Unit Size: 14.5" x 16.5" x 11.5", 36 x 41 x 29 cm
Weight: 48 lbs, 23 kg Typical
Enclosure Type: Nema 4A, 12

FCC and Industry Canada Certified

CONTACT TELCOSAT

  1. LOCATION: #116 - 1919 27Ave NE, Calgary, Alberta, Canada. T2E7E4
  2. PHONE: 1 + 403 291 4031
  3. EMAIL:Click to send and email to us, or copy this address "inquiries@telcosat.com" into your emailer to send an email to Telcosat describing your requirements.We will get back to you to discuss a viable solution.

Follow Us

Copyright (c) 2017 Telcosat. Sitemap